Shenzhen Ariza Electronic Co.,Ltd.
Based on honesty, innovation and far-reaching
Add to Cart
WiFi Water Flow Alarm Tuya app Smart Monitoring Water Level Indicator
Product description
| Product Name | Tuya Wifi water sensor alarm |
| Material | ABS |
| weight | 290g/pcs |
| Package | satndard box |
| Decibel | 130db |
| Battery | 9v 6F22 |
| Alarm device size | 89*55*26mm |
| Environment humidity | <90% |
| App | tuya |
| Woking temperature | -10~60℃ |
| Payment term | T/T, western union, paypal |
Water Leak Detector - Guard Your Home in Real-Time
* Uses Wi-Fi to connect with the Smart Life APP. APP remote control, alarm reminder.
* Real-time remind, never miss a leak again.
* 3 ft Long enough probe cable, fits for complex installation environments.
* Fits for laundry, basement, kitchen, bathroom, sink, floor or aquariums. Also can monitor the preset limit of water level in bathtub, pool and other scenarios.
* The base is fixed with 3M double-sided adhesive. When the base is fixed, the alarm can be removed directly without removing the base.
NO HUB REQUIRED.
HOW TO CONFIGURE
Download the Smart Life APP
1.Launch the app and tap the Plus ( + ) in the top right corner to add a Water sensor device.
2. Select Add manually, Security & Sensors, then Flood Detector (Wi-Fi)
3.Choose your Wi-Fi network and Enter the password. Then tap Next.
4. IMPORTANT !!! Press and hold the button on the water sensor until the light is SLOWLY blinking (2s/time). Tap the “EZ Mode” on the top right corner, change to “AP Mode”. Select “Confirm indicator slowly blink” at the bottom,tap Next.
5. Tap Go to Connect.
6. Select WLAN on your mobile phone setting.
7. Choose SmartLife-XXXX network in the WLAN setting.
8. Switch back to Smart Life app when WLAN is successfully
9. It will show Adding device on the Smart Life App.
10. Now your Water Sensor is successfully added. Tap Done.
Important! !!Important! !!Important! !!
1. The wireless network connected to the mobile phone is 2.4G signal
2. Please change the EZ mode in the upper right corner to AP mode
3. Please keep the blue light in the square button blinking during the connection process
