
Add to Cart
White Wireless Fire Safety Sensor Alarm And Tuya Smart Smoke Detector System Alarm For Indoor Fire
Product Introduction
PA-443W smart Wi-Fi photoelectric smoke fire detection alarm is a household type photoelectric smoke fire alarm, which can detect the smoke generated at the initial stage of a fire and promptly send out sound and light alarms and pass Wi-Fi pushes the alarm information to the mobile APP.Mobile APP pushes alarm prompt, which can prevent fire at home when going out to work or traveling and receive information in time.
Specification
Product name | White Wireless Fire Safety Sensor Alarm And Tuya Smart Smoke Detector System Alarm For Indoor Fire |
Dimension | 10.7 *4.8 cm |
Power supply | DC9V alkaline battery (6LR61) |
Static current | <10uA |
Alarm current | <100mA |
Detecting area | 20 square meter |
Alarm sound | >80dB |
Material | ABS material |
Working temperature | 0℃ ~ +50℃ |
Working Humidity | ≤ 95%RH, no freezing |
WiFi configuration
1. When using the detector for the first time, please install the "Tuya Smart" APP on your smartphone.
2. Make sure your smartphone is connected to WiFi.
①Start the APP, click "Add Device---"Security Sensor"---Sensor (WiFi).
②Long press the "TEST" button for 5 seconds until the LED flashes and a short "Di" tone sounds (long press within 20 seconds of loading the "Di" short tone (long press within 20 seconds of loading the battery to enter the WiFi configuration mode).
③Click "OK" in the APP --- enter the WiFi password, click "OK", the detector enters the configuration mode, the longest duration is 60s.
3. There will be a long beep and the LED indicator will be on for 10 seconds, indicating that the WiFi configuration is complete. When the WiFi configuration fails, the detector exits the configuration mode and emits a short “dididi” sound.
4. WiFi configuration is completed according to the above 3 steps.
Mute and Test
Mute: Mute function In the smoke alarm state, press the test key to temporarily mute the alarm and only the LED light flashes.
Test: Under normal conditions, pressing the test key for 2 seconds will give an audible and visual alarm and push the alarm information to the mobile phone APP.
Installation method
Drill holes in the ceiling with a percussion drill;
Install expansion pipes on the ceiling;
Fix the mounting plate with self-tapping screws;
After aligning the mark of the alarm with the installed version, close it, turn it clockwise, and hear a "click" to indicate that it is installed in place.
Installation Precautions
For indoor installation only;
The alarm should be kept at least 50cm away from the lighting equipment;
Do not install in the bathroom, where water is easy to enter or drip;
Do not install in a place prone to non-fire smoke or steam;
Do not install in a place where the temperature is lower than 0°C or higher than 50°C;
When the cabinet is close to the ceiling, the alarm should keep a distance of more than 60cm from the cabinet;
The alarm should be kept at least 150cm away from the ventilation fan, air conditioner and vent;
When the battery is lost, the alarm cannot be installed on the mounting plate.
Package includes
1 × Smoke Detector Alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
1 x 6LR61
Maintenance and Maintenance
1, Carry out tests,If faults are found, check them in time or return to the manufacturer for maintenance;
2, Under normal environment, the service life of the battery can reach about one year, but harsh environments such as high temperature and high humidity will shorten the service time;
3, The alarm can be installed only after it is confirmed that the function is normal. Before installation, it should be properly kept and corresponding dust-proof, moisture-proof and anti-corrosion measures should be taken.
FAQ
Q:How about the quality of Smoke Detector Alarm ?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time ?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing ?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment ?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive ?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.