Shenzhen Ariza Electronic Co.,Ltd.
Based on honesty, innovation and far-reaching
Add to Cart
TUV CE Led Smoke Detector Alarm 10 Years Battery Operated 85db Fire Smoke Alarm with Silence Button
About this item:
10 YEARS LIFE: This smoke alarm has a built-in 10years lithium battery, it ensures 10 years lifetime without replacing the battery. Smoke detector has a low battery warning which will remind you to change smoke detector
SOUND LOUDLY: Fire alarms smoke detectors also feature loud 85-decibel alarm, easy mounting bracket, a single test/silence button, and an end-of-life signal so you know when to replace the unit.
SILENCE FUNCTION: If non-emergency smoke (e.g., cooking fumes) causes nuisance alerts, you can easily silence them by pressing the test/silence button of smoke alarm, false alarms can be cancelled with a single tap. Mute can last up to ten minutes
24 HOURS PROTECT : If you have problem in smoke alarms interconnection, please contact us. Smoke detectors should be installed in every room (except bathrooms and kitchens). Don't test smoke detector with cigarette or burning paper, sensor will be damaged
| Product name | TUV CE Led Smoke Detector Alarm 10 Years Battery Operated 85db Fire Smoke Alarm with Silence Button |
| Material | ABS |
| Product size | 120*31 mm |
| Alarm Volume | >85 dB(A) at 3 meters |
| Alarm Sensitivity | 0.09 - 0.17 dB/m |
| Battery | 10 years lithium battery |
| Low Battery | 2.6 ± 0.1 V |
| Operation Current | <10uA (standby); <70mA (alarm) |
| Silence Time | approx. 10 minutes |
| Comply to Standard | EN14604:2005/AC:2008 |
Easy Installation: No wiring required
This smoke detector is battery-powered, easy to install and uses an advanced ionization sensor to detect invisible fire particles so that you can react quickly and get to safety if any hazard is detected.
Advanced Detection Technology
With an advanced photoelectric sensor and intelligent chipset, this smoke alarm can accurately detect smoldering fires in seconds and alert you in time.
Premium Quality Material
This smoke alarm is housed in an upgraded premium PC material that is temperature-resistant up to 248 °F, ensuring high durability.
Dust-Proof Function
This smoke alarm is equipped with a dust-proof plate to protect the alarm from becoming clogged, ensuring high accuracy and stability.
1. Normal status: Red LED Flashes once every 60 seconds.
2. Test status: Red LED flashes once every second.
3. Hush/Silence mode: Red LED flashes once every 8 seconds.
4. Low Battery status: Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
5. Fault status: the alarm will deliver beeps every 40 seconds.
During the unit is alarming, you can push the test button, it will be paused the unit alarming for approx 10 minutes. The red LED will flash once every 8 seconds, it indicates the smoke alarm device is running into the silence mode.The silence feature is to be used only when a known alarm condition, such as smoke from cooking activates the alarm.The smoke alarm device will automatically reset after approximately 10 minutes, if after this period, particles of combustion are still present, the alarm will sound again.
1. Twist off the mounting bracket from the alarm.
2. Put the bracket on the installation position and mark the screw holes on the ceiling or the wall.
3. Drill two mounting holes in the marked place by an electric drill (The diameter of the drill hole is 5mm) and insert two plastic anchor plugs by hammer.
4. Screw the mounting bracket to the ceiling or the wall (Refer to figure 3).
5. Attach the alarm to the mounting bracket and turn clockwise to lock the alarm
1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
Qty:50pcs/ctn
Size:39.5*34*32.5cm
G.W:10kg/ctn
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.