Shenzhen Ariza Electronic Co.,Ltd.
Based on honesty, innovation and far-reaching
Add to Cart
3 Years Warranty Wireless Smoke Fire Alarms Detector With European TUV CE Certification
Products Description
3-year battery life: equipped with a sealed 3-year alkaline zinc battery, which can continue to supply power during the 3-year life of the alarm, without the need to replace the battery; and there is no need to worry about battery removal or unauthorized deactivation of the alarm
Accurate response: The use of enhanced photoelectric sensors can quickly and accurately respond to all fire situations, with one alarm; provide smoke or fire warnings as early as possible, while minimizing false alarms
Self-activation: When it is installed in the mounting bracket, this alarm will be automatically activated; the TEST/SILENCE button allows you to temporarily silence the annoying alarm, unless the device is in alarm mode, otherwise the silent mode will not be activated
Auto-check function: continuous self-checking, reminding the alarm if there is a fault or the battery is low; the 85 dB alarm and LED indicator will remind you of the working status of the alarm
Convenient installation: using the included mounting brackets, screws and anchors, it can be easily installed on any wall or ceiling; wireless connection installation
Quality Assurance: Pass TUV certification and meet CE safety standards; 2-year warranty and lifetime customer support
Technological Parameters
| Product name | 3 Years Warranty Wireless Smoke Fire Alarms Detector With European TUV CE Certification |
| Material | ABS Fireproof Materials |
| Operation Current | <10uA (standby); <70mA (alarm) |
| Alarm Volume | >85 dB(A) at 3 meters |
| Colour | White |
| Battery Package | Alkaline (LR6,MN1500) or Carbon Zinc battery (R6P |
| DB value | > 85dB / 3M |
| Warranty | 3 years |
| Battery | 3 years alkaline zinc battery |
| Certification | TUV CE |
Feature
85 decibel alarm: The alarm noise level is set to 85 decibels at 3 meters to remind your whole family and help you prepare for an emergency.
3-year battery life: Built-in 3 years alkaline zinc battery, so you don’t need to replace the battery frequently or worry about power failure.
Silent mode: During the unit alarm period, you can press the test button, and the unit will pause the alarm for about 10 minutes. The red LED light flashes once every 8 seconds, indicating that the smoke alarm has entered silent mode.
LED indicator: red only, different states with different responses
Where to install
1. At first you should install an alarm in the bedroom and walkway. If there are several bedrooms in the house, please install an alarm in every bedroom.
2. Install an alarm above the stairway and on every floor of the house.
3. Smoke, heat and burning things will spread horizontally after rising to the ceiling, so install the alarm in middle of the ceiling.
4. If the alarm can not be installed in the middle of the ceiling, install it keeping 300mm away from the corners .
5. If the alarm is installed in the wall, it should keep 100mm away from the ceiling.
6. If the length of the room or the hall is beyond 30 foot, you need to install several alarms there.
7. When the wall or ceiling is slanting, the alarm needs to be installed minimum 500mm away from the highest wall or ceiling point in the room.
Locations to Avoid
1. High-humidity areas such as kitchens, and bathrooms;
2. Next to air outlets, fans and central heating;
3. Dusty, dirty areas or areas with insects;
4. High-temperature and easily polluted places;
5. Places with difficult access, making it difficult to operate the test function;
6. Within 1.5m from lamps;
7. Next to doors or windows;
8. In the top of rooms with sloping roofs, the corner of the room or other dead-air spaces.
Mounting Alarms
1. Twist off the mounting bracket from the alarm.
2. Put the bracket on the installation position and mark the screw holes on the ceiling or the wall.
3. Drill two mounting holes in the marked place by anelectric drill (The diameter of the drill hole is 5mm) and insert two plastic anchor plugs by hammer.
4. Screw the mounting bracket to the ceiling or the wall .
5. Attach the alarm to the mounting bracket and turn clockwise to lock the alarm
Packing List
1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
FAQ
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.