Shenzhen Ariza Electronic Co.,Ltd.
Based on honesty, innovation and far-reaching
Add to Cart
Smoke and Carbon Monoxide Detector Powered With Led Light And Accurate detection
About this item
1. Easy to install: Comes with Mounting bracket and Screw Kit, easy to install, no additional operations required
2. Guaranteed quality: The quality is guaranteed. The product has passed EN 14604 certification, EN 50291 certification
3. Convenience and intelligence: Continuously checks the battery status automatically
4. Super volume: After rigorous testing by engineers, the volume within three meters is greater than 80 decibels, which is enough to attract people’s attention
5. Quality after-sales:Provide one-year maintenance period and life-long after-sales service
Product specifications
| Prouduct name | Smoke and Carbon Monoxide Detector Powered With Led Light And Accurate detection |
| Battery package | Alkaline(LR6,MN1500) or Carbon Zinc battery(R6P) |
| Operation Current | <15uA (standby); <70mA (alarm) |
| Alarm Volume | >85 dB(A) at 3 meters |
| Smoke Sensitivity | 0.09 - 0.17 dB/m |
| CO sensitivity | 50ppm 60~90min, 100ppm 10~40min, 300ppm ≤3min |
| Low Battery | 2.6 ± 0.1 V |
| Silence Time | approx. 10 minutes |
| Color | White |
| Function | Protection |
Maintenance and Cleaning
There are a few simple steps you need do to keep it working properly.
1. Test the alarm once a week.
2. Clean the alarm surface with a soft brush or cloth every month.
3. Do not paint the alarm.Paint will seal the vents and interfere with the sensor's ability to detect smoke.
4. Never attempt to disassemble the alarm to clean inside.This will in addition to weekly testing,the alarm requires periodic cleaning to
remove dust,dirt, and debris.
Clean the alarm at least once a month to remove dust,dirt, or debris.
Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm device.
If there is a defective battery or other failures, you can refer to "Trouble shooting"for solution,if there are still failures during warranty, you can return to us.
IMPORTANT:Do not attempt to remove the cover to clean inside.This will void warranty.
Replaced Battery
1. The low battery signal can last for maximum 30 days,please replace the batteries in time to keep it working properly.
2. Battery required:standard 1.5V AA batteries.
3. Correctly install the positive and negative poles of the battery(+&-)
4. Waste batteries should not be placed into any household waste or recycling bin as all of them have the potential to spark.Check with your Local Authority for recycling advice.
LED and Buzzer Indicators
1. Normal status:Green LED Flashes once every 60 seconds.
2. Test status: Two sets of 3 long beeps with Red LED flashes and two sets of 4 quick beeps with Red LED flashes.
3. Smoke alarm:Red LED flashes 4 times synchronized with 4 long beeps
4. Carbon monoxide alarm: Red LED flashes 3 times synchronized with 3 short beeps
5. Hush/Silence mode:Red LED flashes once every 8 seconds.
6. Low Battery status:Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
7. Fault status: the alarm will deliver beeps every 40 seconds.
Available scenarios
Powerful functions
Packing List
1 × smoke and carbon monoxide alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
FAQ
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE, EN 14604, EN 50291.
Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
Address and contact information
Contact person: Abbey Wu
Company Name: Shenzhen Ariza Electronic Co., Ltd
Add:The 2nd floor of B1 building,Xinfu industry zone,Chongqing Rd.,Heping village,Fuyong Town,Bao'an district,Shenzhen.